[ simple solution for complex tasks ]
SComplex Video Surveillance, Access Control and Burglar Alarm System

SComplex is a multifunctional modular safeguard tool that integrates the units of the three big areas of safeguard in one device: digital video recording, burglar alarm centre and proximity card access control.
he three parts are manageable on one common user interface. Installation of SComplex is simple, learning the use of the user interface is easy.
SComplex is a dedicated hardware consisting of the following subsystems
SC-Video module – digital video recording
SC-Alarm module – alarm centre
SC-Access module – access control
Uninterruptable power supply
- Advantages
-
Finely usable, since the subsystems dispose of uniform user interface. The unified database provides one-step maintenance of data. Events generated in several subsystems are stored in one common log, contributing to the discovery of relations between different events.
The smaller size, the optimal power supply unit and the common computer processing unit results considerable saving of expenses.
SComplex is to be installed near the cameras, providing an independent storing capacity for 4 to 8 cameras.
- Properties
-
- Fault tolerant
- Provides multiple hours of operation without failure for the cameras as well
- Single cabling reduces costs considerably
- The quality of video signal stays fine due to short cables
- Remote settlements can be monitored via internet / intranet and can be managed generally
- Expansion or modification is simpler and cheaper
- TCP/IP-based encrypted communication between the units of the system
- Communication is protected by open key encryption used in the bank sphere
- Technical data
-
Description: SComplex
Part number: SC01Application
- Digital video recorder
- Access control one door, two way operation
- Burglar alarm
Extension
- Video
- V04, 2nd generation Video processing card, 4 cameras
- V04-02/V08-02, 3rd generation Video processing card, 4/8 cam.
- Hard Disk Drive (2 pcs hDD up to 4 TByte)
- Access control
- STP TIRIS proximity card readers (T10-1sc, T20-1sc)
- STP Mifare proximity card reader (M05-1sc)
- Third party Wiegand or clock/Data readers
- Attendance register terminal (ST031-M16)
- Vandal proof keypad (sc-V16)
- Burglar alarm extensions
- 1, 4 or more device (A1, A4, A4+)
- Burglar alarm zone expander with 8/16/32 zones
- STP Alarm Terminal (sc-1R16)
- Contact ID module
Peripherals
- 2 strike, current consumption up to 1a / 30V
- 4 dedicated inputs: Hand open, Door contact, for each directions
- 4 alarm inputs (Deol/47k) 4 OC output (max. 0.5a / 30V)
- 6 standard inputs
- 2 dedicated inputs for AC power and Battery status monitoring
- Emergency open input, for local or remote control
- Ethernet connection 100 Mbit/s, AutoDMX, RJ45 connector, fix ip address required
Mechanical specification
- Dimension 320 x 320 x 130 mm
- Weight 6.7 kg + 3.4 kg battery
Electrical specification
- Supply voltage 230V ac +/-10%
- Power consumption max. 100 W
- Battery capacity 12ah
- Operating temperature +10 0C - + 50 0C
- Complex system




